SZ Audio Visual Technique Ltd.
 

KISSBOX



Shadow

网络控制解决方案

在同一网路结构内,KISSBOX提供一个支援大部份控制协议的介面,简化数据管理和传输。
优势:
.通常不需要额外的基础设施(利用一般以太网联系)
.没有距离限制
.易于安装/设置
.易于维护

其它优点:
.适用于大多数的电脑作业系统
.相容任何基于TCP或UDP的控制软体
.不需要独立的电源线,因为它通过乙太网进行供电
.免费检测和测试软体


KISSBOX是基于一个高效能的RISC(精简指令集运算)处理器和一个用于网路的ASIC(应用型专用积体电路)来辅助运算而建立。

由于有了这块特殊的网路辅助运算器,
KISSBOX可以处理大多数的网路任务,
而不需要倚赖主处理器,
大大提高了KISSBOX的效能,
比如RTP MIDI固件只有900微秒的延迟(在最坏情况下),
这意味着一个MIDI讯号能于900微秒之内在网路中进行处理并发送到MIDI连接阜。
(PC与Mac的电脑进行类似的处理通常需要2-4毫秒,即2000 – 4000微秒)。

所有的KissBox控制器都使用相同的CPU板,不同型号之间的区别,只在于设备扩展板上。
在CPU板上的主处理器运行着不同的扩展板固件。由于有了firmware uploader(固件上传)这个隐藏在KISSBOX主记忆体中的特别程式,
所有固件都可以通过网路简单并快速地被更新。
KISSBOX的另外一个特点是它使用POE(IEEE802.3af标准 – 通过以太网进行供电)标准命令。
这意味着KISSBOX可以通过以太网的连接进行供电。
更有专用editor软件进行系统安装和配置,以及监测KISSBOX的运行状态。


DMX1TR – DMX-512 Transceiver

The KISS-BOX DMX-512 Transceiver allows you to use a standard Ethernet network to distribute the DMX-512 protocol to any part of your system. You can configure it to behave as an external DMX interface for a PC, Macintosh or generic lighting controller, Multiple Transceivers can be set up to work together and distribute up to 64 universes of DMX across the network. The DMX-512 Transceiver can be set to use the Artnet protocol.

• Sends and receives DMX-512 over Ethernet.
• Artnet compatible
• 2 independent DMX512 universes per box (one for input, one for output)
• Windows, Mac OS-X and Linux compatible
• Acts as standard DMX interface.
• Multi node DMX transmission
• Operating power over the network cable.
– IEEE 802-3af
• Easy software configuration
• ACN Ready
• Ready for new HD MIDI Show Control protocol


MIDI2TR – Dual MIDI/RTP-MIDI Transceiver

The DUAL RTP-MIDI Transceiver allows you to use a standard Ethernet network to distribute the MIDI protocol to any part of your setup, whatever its size. RTP-MIDI is an open standard, supported natively by Mac OS-X (no driver to install), and free driver is available for Windows (XP to Win8, 32 and 64 bits). And it is also compatible with iPad/iPhone over WiFi!
The DUAL RTP-MIDI is seen on these systems as a standard MIDI interface, compatible with any existing MIDI application.
The DUAL RTP-MIDI supports also Plug&Play operation, using Bonjour protocol.

An optional firmware is also available for “Simple UDP” communication modes.

• Full new 2013 design
• Full-Duplex MIDI communication over RTP-MIDI open protocol
• Two independent MIDI IN/MIDI OUT ports
• Plug&Play using Bonjour protocol
• No driver required on Mac, free driver available for Windows
• Compatible with WiFi MIDI on iPad/iPhone
• Supports multi-session with full merging
• RTP-MIDI sync accuracy : 0.1 millisecond
• Optional firmware for UDP and Peer To Peer mode
• Operating power over the network cable.
– IEEE 802-3af
• Easy software configuration using KissBox Editor
• Ready for the new MMA “HD” protocol


IO3CC – 3 Slot I/O Cardframe

The KISS-BOX I/O3 CardCage can hold up to 3 standard Kiss-Box I/O
Cards. Input signals received on input cards will be translated to Ethernet UDP/IP or TCP/IP and send to the network.
Network messages received from the network are translated to output signals on the selected output cards. Any compliant 3th party software can be used to process these messages and thus “read” or “write” standard in and outputs (like relays, contact-closures, analog signals) via a standard Ethernet network. A range of I/O cards is available.
If configured to use the Artnet protocol the I/O3 CardCage can be used to control the cards with DMX-512

• 3 slots hold up to 24 versatile in and/or outputs
• Easy IP (TCP or UDP) control
• Controllable with DMX-512 over Ethernet. (with Artnet Firmware)
• Windows, Mac OS-X and Linux compatible
• Operating power over the network cable.– IEEE 802-3af
• 100 Base-T network compliant
• Easy software configuration
• ACN Ready